Electronic Parts Store : 2 Capacitors, 2 Resistors & more

Saturday, I finally went to an electronics dealer in the southern close suburb of Paris and found some resistors and capacitors of different values to test in my search of a decent Economizer for my Tyco Kilovac EV200A1ANA Contactor

As I was there I also got some wide Heat Shrink, and a Solder sucker

82 and 68 Ohms 10W resistors

3300uF and 2200uF 35V capacitors

And back home, I tried every combination of resistor and capacitor and finally found out that the 82Ohms resistor along with the 4700uF capacitor was OK, especially at - low - 25V starting voltage - when the pack is empty -

and comsumption is quite low, around 0,3A at 25V, which should be around 8W

So these are the components I will mount on the ESS Control Board along with / next to the EV200A1ANA contactor, as soon as I find time for this