After calling the SMA service center on monday, my contractor asked me today if he could come by tonight to get the inverter back
I helped him taking the 32kg inverter out of the kitchen cabinet and here is a picture taken right after the inverter removal
He should take it to the SMA technical service in France and hopefully another unit will be provided in exchange quickly ....
I helped him taking the 32kg inverter out of the kitchen cabinet and here is a picture taken right after the inverter removal
He should take it to the SMA technical service in France and hopefully another unit will be provided in exchange quickly ....
After he left, I measured the DC voltage again and it was lower, at 326V still, because of the grey shy and the sun coming down, it was around 9:15 PM
You probably noticed the AC cable plugged in : This is the extension cord bringing my ESS production into the solar sub panel, so that both productions - from the solar inverter and from the ESS - will then be measured by Wattson sensors
No comments:
Post a Comment